Crusher equipment is used to crush materials. After purchasing the crusher equipment, daily maintenance work should be carried out to improve the service life of the crusher. In the daily manufacturing process of the equipment, good operating habits and post operation maintenance work can increase the service life of the equipment. Today, the editor will explain the daily maintenance work of crusher accessories to everyone.
Firstly, when crushing stone materials, appropriate materials should be selected based on the performance of the crusher. If the crushed materials are too soft or too hard, it will cause wear and tear on the accessories of the crusher equipment, especially in the sand and gravel production line where the crushed materials are quite miscellaneous, so attention should be paid to this issue.
Before crushing the material, a simple screening process should be carried out to prevent the high content of fine powder during crushing. Therefore, screening is necessary. If there is too much fine powder, it will affect the conveying speed during the crushing process. If the fine powder adheres to the conveyor belt, it will cause the feeding speed of the material to slow down,
If encountering materials that need to be crushed, it is necessary to consider the viscosity, humidity, temperature, etc. of the crushed materials. Therefore, different crushers need to be selected according to different situations. Different crushers can crush different materials differently. Therefore, different types of crushers are selected based on the size of material moisture content, temperature difference, and viscosity.
When purchasing crusher equipment, one cannot simply look at the performance, appearance, and price of the crusher. In fact, it still depends on the quality of each component of the crusher. Choosing a good crusher requires selecting high-quality and wear-resistant components in order to make the equipment effective.
After the material is crushed, the particle size of the finished product will also have an impact on the service life of the crusher. When the required particle size of the material is finer, the wear on the accessories of the crusher will be greater. When the required particle size of the material is finer, the friction between the material and the accessories will increase, resulting in greater wear.